Filter
Top Products
1-28
Ready (Paper) LED indications
The
Ready
LED indicates the current status of the printer.
LED Printer status
Off
❍
The power switch is off or the printer is in sleep mode. If the printer
is in sleep mode, it will wake up automatically when it receives data
or when you press the control panel button.
Blinking (Blinking at 1 second intervals)
The printer is warming up.
(Blinking at 2 seconds intervals)
The printer is cooling down and stops printing until the internal
temperature of the printer is lower.
On
The printer is ready to print.
The
Ready
LED also works as the
Paper
LED when the
Alarm
LED is also lit. They will
blink simultaneously to indicate a paper error
LED Error Action
Ready
Alarm
Paper
Toner
Data
Drum
Paper jam
No paper
Misfeed
Clear the paper jam referring to
Chapter. See Chapter 4 “PAPER
JAMS and How to clear them” and
press the panel button if the printer
does not automatically resume
printing.
Load paper in the printer. See “How to
load paper into the Paper cassette” in
Chapter 1. Then press the panel button.
Reinstall the paper and press the panel
button.
No paper Load paper in the printer referring to
“How to load paper into the Paper
cassette” in Chapter 1 and press the
panel button.