Filter
Top Products
CHAPTER 3 MAINTENANCE
3-11
☛
2
.
Place the drum unit assembly on a piece of cloth or disposable paper that is on a flat,
horizontal surface. Pull the toner cartridge out of the drum unit assembly while holding down
the lock lever with your right hand.
Fig. 3-15 Removing the toner cartridge
✒ Note
Discard the used drum unit according to local regulations. If you are not sure of them,
consult your local dealer/retailer. Be sure to seal up the drum unit tightly so that toner
powder does not spill out of the unit.
It is recommended to put the drum unit on a piece of disposable paper or cloth in case of
accidental toner spill or scatter.
Handle the toner cartridge carefully as it contains toner. If toner scatters and your hands or
clothes get dirty, wipe or wash it off with cold water immediately.
☛
3
.
Unpack the new drum unit.
!
Caution
Only unpack a drum unit immediately before you need to install it into the printer. If an
unpacked drum unit is subjected to excessive direct sunlight or room light, the unit may be
damaged.
Handle the drum unit carefully. If toner scatters on your hands or clothes, wipe or wash it
off with cold water immediately.
Hold down this
Lock Lever.