Brother HL-1270N Printer User Manual


 
4-22
Image defect
examples Recommendation
.
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
White Vertical streaks
You may clear the problem by wiping the scanner window with
a soft cloth. See “How to clean the printer” in Chapter 3.
The toner cartridge may be damaged. Install a new toner
cartridge. See "How to replace the Toner cartridge" in Chapter
3.
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
Page skew
Make sure the paper or other media is loaded into the paper
cassette correctly and that the guides are not too tight or too
loose against the paper stack.
Set the paper guides correctly. Make sure that the tip of the
paper guides fit into the slot correctly. See “How to load paper
into the Paper cassette” in Chapter 1.
If you are using the manual feed slot see "How to use the
Manual Feed Slot" in Chapter 1.
The paper cassette may be too full. See "How to load paper
into the paper cassette" in Chapter 2.
Check the paper type and quality. See "What kind of paper can
I use" in Chapter 1.
Curl or wave
Check the paper type and quality. Both high temperature and
humidity will cause paper to curl. See “What kind of paper
can I use” in Chapter 1.
If you use the printer infrequently, the paper may have
remained in the paper cassette too long. Turn over the stack of
paper in the paper cassette. Also, try rotating the paper 180° in
the paper cassette.
Try printing using the straight-through output path. See "How
to use the Manual Feed Slot" in Chapter 1.
BDEFGH
abcefghijk
ACD
bcde
134
Wrinkles or creases
Make sure that paper is loaded properly. See "How to load
paper into the paper cassette" in Chapter 1.
Check the paper type and quality. See “What kind of paper
can I use” in Chapter 1.
Try printing using the straight-through output path. See "How
touse the Manual Feed Slot" in Chapter 1.
Turn over the stack of paper in the tray or try rotating the paper
180° in the input tray.