PREPARATION
AND SIMPLE USE
Preparation and Simple Use Guide
1
Preparation and Simple Use Guide
Simple steps to prepare and use the machine.
Follow these simple steps below to prepare and use the machine.
However, before you perform these steps, refer to the Important Information (page 91), and
Advice for Preparation and Simple Use Guide (page 4).
If you need further information, refer to BASIC USE or ADVANCED USE.
1 Make sure you have the items shown below
Check that you have the following items:
* The printing cartridge is already installed in the machine.
Keep the packing materials for possible future transport. Failure to pack
the machine properly may damage the machine and such damages will not
be covered under warranty.
2 Read the Quick Setup Guide
Follow the instructions on the Brother Quick Setup Guide to set up the machine.
3 Setting the Dialling Mode (Tone/Pulse) (Not available in New Zealand)
Press Menu/Set, 1, 1. The screen prompts you to select TONE or PULSE.
Use or to select the dialling mode, and press Menu/Set when the screen displays
the dialling mode you want.
Press Stop/Exit.
4 Using the telephone
Pick up the handset.
When you hear a dial tone, dial the number, using the dial pad.
To hang up, replace the handset on its cradle.
Telephone
Handset
Handset
Curled Cord
User’s Guide
Paper
Wire Extension
Paper Tray
One Touch
Name Label
Adapter
(Only for Australia)
Telephone
Line Cord
Quick Setup Guide
1
2
3
1
2
3