Filter
Top Products
iii
Quick Reference Guide
Sending Faxes
Automatic Transmission
1 Insert the document face
down in the Automatic
Document Feeder.
2 Enter the fax number you
want to call.
3 Press Fax Start.
Receiving Faxes
Select Receive Mode
Press Receive Mode to select
FAX ONLY, FAX/TEL,
TAD:ANSWER MACH.
(FAX-
717/727) or
MC:MSG CTR
(FAX-737MC) or MANUAL.
If you select FAX/TEL, make
sure you set Ring Delay and F/T
Ring Time.
Storing Numbers
Storing One Touch Dial
Numbers
1 Press Menu/Set, 6, 1.
2 Press One Touch key
where you want to store a
number.
3 Enter a number (up to 20
digits), and then press
Menu/Set.
4 Enter a name (or leave it
blank), and then press
Menu/Set.
5 Press or to select
the type of number and
press Menu/Set.
6 Press or to select if
you set ANTI JUNK to ON
(or OFF) and press
Menu/Set. (Not available in
Australia and New
Zealand)
7 Press Stop/Exit.
Storing Speed Dial Numbers
1 Press Menu/Set, 6, 2.
2 Enter a two-digit Speed Dial
number and then press
Menu/Set.
3 Enter a number (up to 20
digits), and then press
Menu/Set.
4 Enter a name (or leave it
blank), and then press
Menu/Set.
5 Press or to select
the type of number and
press Menu/Set.
6 Press or to select if
you set
ANTI JUNK
to
ON
(or
OFF
) and press
Menu/Set. (Not available in
Australia and New
Zealand)
7 Press Stop/Exit.