Filter
Top Products
80
Chapter 13
2
Open the top cover by lifting the lever
on the right side of the top cover.
3
Pull the jammed printout gently from the paper tray toward the front of the machine. If the
printout is jammed, then pull it toward the back of the machine.
4
Remove the print cartridge and turn the spool to tighten the ribbon.
5
Install the cartridge. (See Changing the Ribbon, page 86.)
6
Close the top cover.
Press the both edges of the top cover and close it until it clicks.
7
Put the recording paper back into the paper tray.
Top Cover
NO!
YES!
Printout is jammed