Filter
Top Products
Troubleshooting and Maintenance
87
MAINTENANCE
3
Take the used ribbon out of the cartridge:
1
Snap out the upper white spool and slide the roll off the blue gear. (Do not remove the blue gear)
2 Lift out the lower roll.
4
Slide the white elastic off the new refill rolls and set them down with the full roll in the lower
position. (The ribbon’s shiny side is facing down.)
5
Remove the white gear and spools from the ends of the used cardboard cores. Then insert
them into the same positions in the new cores.
Cartridge
Used Ribbon
White Gear
Blue Gear
Upper White Spool
Lower White Spool
White Spool
White Gear
New Ribbon