Filter
Top Products
22
Chapter 2
Automatic and Manual Fax Redial
Automatic Fax Redial: If you are sending a fax automatically and the line is busy, the machine will
automatically redial up to 3 times at 5 minute intervals.
Manual Fax Redial: Place the document to be re-sent and press Redial/Pause and then Fax Start
to make a second call to the last number dialled.
Broadcasting
Using the numbers you have stored in Groups, One Touch and Speed Dial memory, you can
“Broadcast” faxes automatically to a maximum of 104 (FAX-727/737MC) or 64 (FAX-717)
different locations in a few simple steps.
To Broadcast, you must set Memory TX to either ON or NEXT FAX ONLY.
After the Broadcast is completed, a Broadcast Report will be printed automatically to let you know
the results.
1
Insert the document face down in the Automatic Document Feeder.
2
Press Menu/Set, 3, 9 to select ON or NEXT FAX ONLY.
3
Press Menu/Set.
4
Enter the One Touch and Speed Dial numbers (one after the other), Search numbers or a Group
number you have stored.
5
Press Fax Start. The machine stores the document in memory, and then transmits it to all the
numbers you entered. If the line is busy, your machine will redial.
Press
Stop/Exit
during transmission to cancel the current fax Broadcast.
To cancel all locations, press
Menu/Set
,
4
. (See Cancelling a Scheduled Job,
page 40.)