Filter
Top Products
DRIVER AND SOFTWARE 2 - 6
Job Spooling
The printer saves data that you want reprinted.
You can reprint a document without sending the data again from your PC (except for secure printing).
■ Last Job Reprint: Reprint the last job
■ Secure Print: Print the data with a password
■ Public: Save the data without a password
■ Proof: Save the data and print it
For more information about the Reprint function, see Reprint button on page 3-3.
Quick Print Setup
You can turn the quick print setup function ON or OFF. A small selection window appears on your
computer. This will then let you make changes to the settings of the following functions:
■ Multiple Page
■ Manual Duplex (For HL-6050)
■ Duplex (For HL-6050D and HL-6050DN)
■ Toner Save Mode
■ Paper Source
■ Media Type
Sleep Time
When the printer does not receive data for a certain period of time (timeout), it enters sleep mode. Sleep
mode acts as though the printer was turned off. The default timeout is 5 minutes. When Intelligent Sleep
Mode is selected, it is automatically adjusted to the most suitable time-out setting depending on the
frequency of your printer use. While the printer is in sleep mode, the light on the display is off, but the
printer can still receive data from the computer. Receiving a print file or document automatically wakes
up the printer to start printing. Pressing one of the buttons will also wake up the printer.
Sleep mode can be turned off. To turn sleep mode off, go to the Advanced tab, select Device Options
and then select Sleep Time. Double click the word Sleep Time in the Sleep Time screen, this will allow
the Sleep Time Off function to appear, click Sleep Time Off to stop the printer going into sleep mode.
The Sleep Time Off function can be hidden by double clicking the word Sleep Time in the Sleep Time
screen again. We recommend that you keep Sleep mode on for power saving.
Status Monitor
This reports the printer status (any errors that may happen with the printer) when printing. The default
setting for the Status Monitor is off. If you would like to turn the Status Monitor on, go to the Advanced
tab, select Device options and then select Status monitor.
Macro
You can save a page of a document as a macro to printer memory. Moreover, you can execute the saved
macro - in other words, you can use the saved macro as an overlay on any documents. This will save
time and increase printing speed for often used information such as forms, company logos, letter head
formats or invoices.
If you want to prevent other people from printing your data using the reprint setting, clear the Use
Reprint check box in the job spooling settings.