Filter
Top Products
3 - 24 CONTROL PANEL
List of factory settings
Table 3-1 shows the factory settings.
Network factory default setting
If you wish to reset the print server back to its default factory settings (resetting all information such as
the password and IP address information), hold down the network test button on the network board
(NC-6100h) for more than 5 seconds.
■ The emulation mode affects the setting. Effective modes are shown in brackets in the following
table.
■ The following settings cannot be restored to the factory settings with FACTORY RESET in the
RESET MENU menu: INTERFACE menu, HRC, PAGE PROTECTION, SCALABLE FONT,
LOCK PANEL, page counter and local language for display messages.
■ The COPY setting is always restored to the factory setting when the printer is turned off and on
again.