Filter
Top Products
Printing Methods
21
1
Note
If you try to print when the paper adjustment lever for duplex printing is not correctly set for the paper size
being used, the LCD will show DX Lever Error and the machine will stop printing. If this happens, move
the lever to the correct paper size position.
b Choose the following settings from each menu of the printer driver.
Note
• You should use plain paper, recycled paper or thin paper. Do not use bond paper.
• The name of options in the drop-down lists may vary depending on your operating system and its version.
For other settings, see Driver and Software in Chapter 2.
c Send the print data to the machine. The machine will print on both sides of the paper automatically.
Note
• Do not place your hands in the paper exit area.
• Do not place anything in the printed pages exit path.
• Wait until all the printed pages have exited the machine before picking them up.
Paper Size
A4 Letter Legal Folio
Media Type
Plain Paper Recycled Paper Thin Paper
Paper Source
Tray1 MP Tray Tray2
(if available)
Tray3
(if available)
Tray4
(if available)
Tray ID 1 Tray ID 2 Tray ID 3 Tray ID 4
Duplex / Booklet
Duplex
Duplex Type in Duplex Settings
There are four options for each orientation. (See Duplex / Booklet uu page 31.)
Binding Offset in Duplex Settings
You can specify the offset for binding. (See Duplex / Booklet uu page 31.)