Filter
Top Products
Chapter 2
18
Loading documents 2
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF
(MFC-295CN only) 2
The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.
Recommended environment 2
Document Sizes Supported 2
How to load documents 2
IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric. Instead use the scanner glass.
Make sure documents with ink or liquid
correction fluid are completely dry.
a Unfold the ADF Document Output
Support Flap (1).
b Fan the pages well.
c Adjust the paper guides (2) to fit the
width of your documents.
d Make sure you place the documents
face down, top edge first in the ADF
until the LCD says ADF Ready and you
feel them touch the feed roller.
IMPORTANT
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Temperature: 20 to 30 °C
Humidity: 50 to 70%
Paper:
80 gsm
Length: 148 to 355.6 mm
Width: 148 to 215.9 mm
Weight:
64 to 90 gsm
1
2