Filter
Top Products
Chapter 6
36
Receive Mode settings 6
Ring Delay 6
The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine choose the maximum number of
rings.
(See Operation from extension telephones
on page 49 and Fax Detect on page 37.)
a Press Menu, 2, 1, 1.
b
Press
a
or
b
to choose how many times
the line rings before the machine
answers (
02
-
10
for Australia,
01
-
10
for
New Zealand,
00
-
10
for some countries).
Press OK.
If you choose 00, the line will not ring at
all.
c Press Stop/Exit.
F/T Ring Time
(Fax/Tel mode only) 6
When somebody calls your machine, you and
your caller will hear the normal telephone ring
sound. The number of rings is set by the ring
delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T Ring (fast double-
ring) for the time you have set in the F/T Ring
Time setting. If you hear the F/T Ring it
means that you have a voice caller on the
line.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring; however, you can still answer the
call on any telephone. (For more information
see Using remote codes on page 49.)
a Press Menu, 2, 1, 2.
b Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or
70 seconds for Australia and some
countries, 20, 30, 40 or 55 seconds for
New Zealand).
Press OK.
c Press Stop/Exit.
Note
Even if the caller hangs up during the
F/T Ring, the machine will continue to ring
for the set time.