Filter
Top Products
Getting started
2 - 6
2
Sleep Time
Setting the Sleep Time reduces power
consumption by turning off the fuser inside
the MFC while it is idle. You can choose how
long the MFC is idle (from 00 to 99 minutes)
before it goes into sleep mode. The timer is
automatically reset when the MFC receives a
Fax or PC data or makes a copy. The factory
setting is 05 minutes. While the MFC is in
sleep mode you will see
Sleep on the LCD.
If you try to print or copy in sleep mode, there
will be a short delay while the fuser warms up
to its working temperature.
1
Press Menu/Set, 1, 6, 2.
2
Use the dial pad to enter the length of
time the MFC is idle before it goes into
sleep mode (00 to 99).
Press Menu/Set.
3
Press Stop/Exit.
Note
■ If you want to turn off sleep mode, press
Start
and Options simultaneously in
Step 2.
■ If the MFC is in Sleep Mode when you
change the Sleep Time, the new setting
will take effect the next time the MFC
copies, prints or is turned off and on.
Setting the LCD Contrast
You can change the contrast to help the LCD
look lighter or darker.
1
Press Menu/Set, 1, 7.
2
Press ▲ or ▼ to select Light or Dark.
Press Menu/Set.
3
Press Stop/Exit.
Ecology
2.Sleep Time
General Setup
7.LCD Contrast