Filter
Top Products
Chapter 3
3 - 8
Note
■ If you did not use up any of the numbers
for Groups, access codes or credit card
numbers, you can ‘broadcast’ faxes to as
many as 258 different numbers.
■ The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use Dual Access and Delayed
fax.
■ Enter the long dialing sequence numbers
as you would normally, but remember that
each One-Touch and Speed-Dial number
counts as one number, so the number of
locations you can store becomes limited.
(See Access codes and credit card
numbers on page 5-4.)
■ If the memory is full, press Stop/Exit to
stop the job or if more than one page has
been scanned, press Start to send the
portion that is in the memory.
Checking job status
Check which jobs are still waiting in the
memory to be sent. (If there are no jobs, the
LCD shows
No Jobs Waiting.)
1
Press Menu/Set, 2, 6.
2
If you have more than one job waiting,
press
▲ or ▼ to scroll through the list.
3
Press Stop/Exit.
Canceling a fax in progress
If you want to cancel a fax, while the MFC is
scanning, dialing or sending it, press
Stop/Exit.
Fax
6.Remaining Jobs