Filter
Top Products
TROUBLESHOOTING 10 - 7
4
Your wireless network is connected successfully.
5
You can now use the Brother Wireless Setup Wizard to
configure your print server settings.
Network Initial Setup Problems
If having configured the necessary wireless network settings and you
are unable to print, check the following:
1
Make sure that the printer is powered on, is on-line and ready to
print.
Verify that the printer and the configuration are good by printing
the Network Configuration Page. See How to Print a Network
Configuration Page on page A-8 for information how to print the
Network Configuration Page on your print server. If the test fails,
check:
If you cannot print the Network Configuration Page or the
network configuration is incorrect, try to restore the factory
default settings of the print server by pressing the Network Test
Button on the back of the printer for more than 5 seconds. Then,
turn off the printer and then on again. You can check the settings
by printing the Network Configuration Page. See How to Print a
Network Configuration Page on page A-8 for information how to
print the Network Configuration Page on your print server.