Filter
Top Products
5 - 5 CONFIGURING INTERNET PRINTING FOR WINDOWS
®
7
The print server is configured by default to poll the POP3 server
every 30 seconds. You may change this value, if desired.
8
If you have enabled notification, enter the address of your SMTP
server (consult your network administrator if you do not know
this address).
9
Click the OK button and save the changes. Now exit the
BRAdmin application. You have now configured the print server
to receive print jobs.
Brother Internet Print: Using a Web Browser to
Configure the Print Server
1
Connect to the print server IP address using your web browser.
2
When you reach the network configuration screen, you will be
prompted for a password. The default password is "access".
3
Select the Configure POP3/SMTP option and enter the
information as described above. Refer to "Brother Internet Print:
Using a Web Browser to Configure the Print Server".
4
You should see a Segmented Message Timeout option. If a print
job is separated into multiple E-mail messages using the Partial
E-mail Print feature of the BIP, this value indicates how long the
print server will wait for all of the segments of the message to
arrive.
Brother Internet Print: Using TELNET to Configure
the Print Server
Skip this section if you used BRAdmin or a Web Browser to
configure the remote print server.
As an alternative to BRAdmin, you can use the print server
remote console to configure the print server. The console can
be accessed via TELNET. When you access the print server
using these utilities, you will be asked for a password. The
default password is access.