Filter
Top Products
NOVELL
®
NETWARE
®
PRINTING 6 - 2
General Information
In order to use a Brother print server on a NetWare
®
network, one or
more file servers must be configured with a print queue that the print
server can service. Users send their print requests to the file server's
print queue, and the jobs are then spooled (either directly, or in the
case of remote printer mode, via an intermediate NetWare
®
print
server) to the appropriate Brother print server.
The system administrator can create Bindery (NetWare
®
3), NDS
(NetWare
®
3 and NetWare
®
4) based queues in a single environment
without having to switch between applications by using the BRAdmin
application.
NetWare
®
5 users wishing to configure an NDPS printer must use the
NWADMIN application supplied with NetWare
®
5. Please note that it
is possible to create IPX BINDERY or NDS based queues on a
NetWare
®
5 system using the BRAdmin application.
You must install the Novell
®
NetWare
®
Client 32 if you wish to create
queue information on your NetWare
®
servers using the BRAdmin
application.
If you can't use the BRAdmin application in your environment, you
can create the queue using the traditional NetWare
®
PCONSOLE
utility or NWADMIN utilities, but you will then also need to use the
Brother BRCONFIG utility, TELNET or a WWW browser to configure
the print server.
Brother print servers can service up to 16 file servers and 32 queues.