Filter
Top Products
B - 5 APPENDIX
Configuring the Brother Wireless Print Server
You can configure and change the wireless print server settings
using the Brother Wireless Setup Wizard (recommended), the
BRAdmin Professional utility, printer control panel buttons, a web
browser or by using TELNET.
Using the Control Panel Menus to Configure the
Wireless Print Server
You can access the NETWORK menu by following steps below to
configure the wireless print server. See the printer User’s Guide for
more information on the control panel menus and control panel
buttons.
Press any of the Menu buttons (+, -,
Set or Back) to take the printer offline.
Press the + button or the - button to
move forward or backward through
the menus until NETWORK is
displayed.
Press the Set button to move to the
next menu level.
READY
INFORMATION
NETWORK