Filter
Top Products
142
CHAPTER SIXTEEN
2
Open the feeder. Remove any paper in the feeder, and load the new
paper. Fan the stack of paper before loading.
3
Load the paper stack with the printing (coated) side facing up. Adjust
the paper guide. Make sure the paper is stacked below the arrow. You
can load up to approximately 200 sheets of 20 lb (75g/m
2
). plain paper.
4
Close the feeder cover.
Manual Feed Slot
You can use only one sheet at a time in the Manual Feed Slot. Paper loaded
in the Manual Feed Slot is printed first, even when there is paper in the
multi-purpose sheet feeder.
If you want to print more than one page using the Manual Feed Slot, on
your PC, in the printer driver Properties Paper tab, select “manual feed”.
1
Load one sheet of paper in the Manual Feed Slot, holding it with both
hands. Align the paper in the center of the feeder.
2
Gently push the paper all the way down in the slot.
3
Adjust the guides to make sure the paper is straight and centered to
prevent a paper jam or misfeed.
If you forget to insert paper in the manual feed slot, the MFC will print from
the cassette.