Filter
Top Products
250
GLOSSARY
LCD (liquid crystal display) The display screen on the MFC that shows
interactive messages during On-Screen Programming and defaults to the
date and time when the machine is idle.
manual fax When you press
Hook
—OR—
Speaker Phone
—OR—lift the
handset so you can hear the receiving fax machine answer before you
press Start to begin transmission.
Memory Status Report Shows how much memory is being used, how
much is left, and the type of messages in memory.
memory usage Instructs the MFC how to allocate the memory.
Message Center Mode (For MFC 7160C Only) You can set up your
MFC to receive voice and/or fax messages into its memory so you can
retrieve them remotely.
Multi-Function Link Pro Software application Turns your MFC into
a printer and a scanner and enables PC faxing using the MFC. (Optional
Brother Software application)
NetCentric FaxStorm Software application Brings together the
power of the Internet and the reliability of fax using Internet faxing
from your desktop.
Next Fax Reservation Accepts the next document in the document
feeder for transmission while the Memory is full.
OGM (Out-Going Message) The message callers hear when you call
your Message Center or external answering machine.
One Touch Keys on the MFC control panel where you can store numbers
for easy dialing. You must use a separate key for each number.
Out of Paper Reception Receives faxes into the MFC’s memory when
the machine is out of paper.
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Paging Feature enables your fax unit to call your pager when a fax and/or
a voice message is received into its memory.
Pause Allows you to place a 3.5 second delay in the dialing sequence
stored on One Touch and Speed Dial numbers.
Photo Mode A resolution setting that uses varying shades of gray for the
best representation of photographs.
polling The process of a fax machine calling another fax machine to re-
trieve waiting fax messages.