Brother MFC 7150C Printer User Manual


 
51
SETUP RECEIVE
Canceling a Scheduled Job
You can cancel tasks you’ve scheduled, such as Delayed Fax or Polling
Transmit.
1
Press
Function
,
1
,
4
. Any waiting jobs appear on the display. If no job
is waiting, the screen displays “NO JOB WAITING.”
4.REMAINING JOBS
2
If you have more than two jobs waiting, use or to select the job
you want to cancel. Press
Set
when the screen displays your selection.
OR
If you have only one job waiting, go to step 3.
3
Press
1
to cancel—OR—Press
2
to exit without canceling.
To cancel another job, return to Step 2.
4
Press
Stop
to exit.
Distinctive Ringing
This MFC feature lets you use the Distinctive Ringing subscriber service
offered by some telephone companies, which allows you to have several
telephone numbers on one phone line. Each phone number has its own
Distinctive Ringing pattern, so you’ll know which phone number is ringing.
This is one way you can have a separate phone number for your MFC.
Your MFC has a Distinctive Ringing function, allowing you to dedicate one
phone number just for receiving faxes. You’ll need to follow the directions
below to “register” the new Distinctive Ringing pattern, that was assigned
by the Telephone Company, so your MFC can recognize its incoming calls.
(Call your Telephone Company if you don’t know your ring pattern.)
You can change or cancel the Distinctive Ringing pattern at any time. You
can switch it off temporarily, then turn it back on. When you get a new fax
number, make sure you reset this function.
You can register only one Distinctive Ringing pattern with the MFC. Some
ringing patterns cannot be registered.
The MFC will answer only calls to its registered number.
To have your TAD answer only the main number, the MFC must be in
Manual Mode.
In FAX/TEL or FAX mode, the MFC will answer all numbers on the
phone line.
See
Checking
Job Status
p. 58