Filter
Top Products
58
CHAPTER SEVEN
Real Time Transmission
When memory is full, the MFC cannot continue scanning documents into
memory before sending. However, you can turn on REALTIME TX.
1
Insert the document in the feeder.
2
Press
Function
,
1
,
3
,
9
.
3
The screen displays
9. REAL TIME TX
4
Press or to choose NEXT FAX ONLY or ON.
5
Press
Set
.
6
Press
Stop
to exit.
7
Enter the fax number and press
Start
.
8
As soon as the phone line is free, the MFC starts dialing and sending the fax.
Checking Job Status
You can check which jobs are in memory waiting to be sent. Press
Function
,
1
,
4
to check it. While the MFC is sending or receiving a fax,
press
Stop
. The screen displays job numbers. Press or to see them.
Canceling Jobs in Memory
You can cancel tasks you’ve scheduled, such as Polling Transmit, as well as
all faxes waiting in Memory to be sent.
1
Press
Function
,
1
,
4
. Any waiting jobs appear on the display. If
nothing is waiting, the screen displays NO JOB WAITING.
4.REMAINING JOBS
2
If you have more than two jobs waiting, use or to select the job
you want to cancel. Press
Set
when the screen displays your selection.
—OR—
If you have only one job waiting, go to step 3.
3
Press
1
to cancel—OR—Press
2
to exit without canceling.
4
Press
Stop
to exit.
See
Checking Job
Status
above
See
Canceling Jobs
in Memory
below