Filter
Top Products
Introduction
8
Cutter unit
• The cutter unit contains a very sharp blade. To
prevent injury from a broken cutter blade:
• Make sure the top cover is closed when using
the cutter unit.
• Don't apply too much pressure when fitting or
removing the cutter unit.
• When the cutter unit becomes blunt you should
replace it with a new one.
• If you break the cutter unit, unplug your printer
from the power and remove the cutter unit
carefully with a pair of tweezers.
• If the machine jams due to a build up of adhesive,
you should clean the surface of the paper guide.
Unplug the printer from the power and wipe away
the adhesive build up from the surface of the
paper guide using a cloth or tissue dipped in isopropyl alcohol. We recommend that you
clean the paper guide when replacing the cutter unit.
• The cutter unit should give you an average number of 5,000 cuts or more, depending on
how you use the machine. If your printer does not cut the labels properly or starts to jam
often, the cutter might have reached the end of its life; you should replace the cutter.
Paper guide surface