Filter
Top Products
33
Maintenance and
Troubleshooting
STEP
1
STEP
2
STEP
3
Before using the printer
Using only this printer (No PC)
Introduction
The default unit setting for English-US is "inch". For all other Languages the default
setting is "mm".
1
Press the Menu button in the Time Display mode.
Menu Selection mode is displayed.
2
Select "Menu 10/12" by pressing the up
or down arrow button ( / ) and then
press the OK button.
3
Select the unit by pressing the up or
down arrow button ( / ) and then press
the OK button.
The setting is saved and the screen returns to the
Time Display mode.
1
Press the Menu button in the Time Display mode.
Menu Selection mode is displayed.
2
Select "Menu 11/12" by pressing the up
or down arrow button ( / ) and then
press the OK button.
3
Select the contrast by pressing the up or
down arrow button ( / ) and then press
the OK button.
The setting is saved and the screen returns to the
Time Display mode.
Set the unit of measure (inch or mm): Menu 10/12
Menu 10/12
Unit
Unit
mm
Adjusting the contrast of LCD: Menu 11/12
Menu 11/12
LCD Contrast
LCD Contrast
+1