Filter
Top Products
STEP 1 Before using the printer
16
The usable types of DK Roll for the printer are shown below.
Be sure to use only genuine DK Rolls in the printer.
DK Roll
General name for
DK Label and
DK Tape.
DK Label
This is a pre-cut label roll.
Thermal recording paper and thermal recording film are
available.
DK Tape
This is a freely cuttable full-page adhesive tape.
Thermal recording paper and thermal recording film are
available.
1
Press the ON/OFF button to turn the printer
OFF.
Hold the DK Roll compartment cover at the
sides near the front of the printer and lift firmly
upwards to open the cover.
2
Pull up the roll release lever and
remove the protection sheet
from the printing unit.
Remove the battery protection
sheet.
3
Place the spool into the spool
guides in the DK Roll
compartment.
• Make sure that the spool arms are
inserted firmly in the spool guides
on both sides.
• Insert the spool with the DK Roll
locator into the guide on the right
hand side of the printer.
Installing the DK Roll
4
Applicable DK Rolls
Installing the DK Roll
Roll release lever
Printing unit protection sheet
Battery protection sheet
Spool
Spool guide