Filter
Top Products
Chapter 13
110
b Select the [Use Peeler function] check
box on the [Basic] tab.
c Click [OK] to close the dialog box.
After Printing 13
Printed labels can be automatically peeled off
their backing paper before they are fed out of
the media exit. Be sure to remove the printed
label. If a label remains in the media exit, the
next label will not be printed.
Use scissors to cut off the backing paper that
is fed out.
NOTE
With the label peeler, a sensor detects
whether or not the label has been peeled
off, and controls the appropriate
operation. The detection sensitivity of the
sensor can be adjusted. For details, see
Sensor Adjustment Tab on page 37.
Product Specifications13
Size: 4.26" (W) 5.12" (D) 1.11" (H) (108
mm (W) 130 mm (D) 28 mm (H))
Weight: 0.14 lb (0.062 kg)