Filter
Top Products
TeraStation User Manual 121
Workgroup/Domain
Click [Modify
Settings] to change
settings.
Active Directory
Domain Controller
Name
Enter [Active Directory Domain Controller Name] to use [Active Directory].
* You can enter up to 63 bytes(UTF-8). Do not use multi-byte characters.
* Alphanumeric characters, -(hyphen), and _(underscore) may be used.
* Do not use a symbol as the rst character.
Administrator
Name
Enter the Administrator account username for [Administrator Name].
* This must be entered if [NT Domain] or [Active Directory] is selected for
[Authentication Method].
* You can enter up to 256 bytes(UTF-8). Do not use multi-byte characters.
* Alphanumeric characters, -(hyphen), _(underscore), and .(dot) may be used.
* Do not use a symbol as the rst character.
Workgroup/Domain
For Workgroup
Authentication
Select to access the TeraStation from a workgroup network.
[Delegate Authority to TeraStation] (recommended)
Only users that are registered in the TeraStation can access it. Local users’
usernames and passwords must match the usernames and passwords of their
Windows logins.
[Delegate Authority to External SMB Server]
Access to the TeraStation is controlled by an Authentication Server. Microsoft
networking knowledge is required to congure this. Consult your network
administrator for details.
[Use Windows Domain Controller as Authentication Server]
Users are veried by a Domain Controller, but the TeraStation does not join the
domain.
* If you specify the Windows Domain Controller as an external SMB authentication
server, the workgroup name of the TeraStation and the domain name of the
Windows Domain Controller must match.
[Automatic User Registration]
Select to add users allowed by the authentication server to the TeraStation’s
authenticated user list .
Example:
Use automatic registration for a while to add users, then disable to limit users to
those who accessed the shared folder during the authentication registration process.
[Enable Authentication Shared Folder]
Use the folder as an authentication test folder that can be accessed by users
registered to the authentication server.
Authentication
Server Name or IP
Address
When [Delegate Authority to External SMB Server] is selected for [Authentication
Method], specify the external server to be used for user authentication by its name
or IP address.
* When connecting via AFP, FTP, FTPS, or SFTP, always use an IP address. The server
name may not work.
* Always use the IP address when specifying a server that is not in the same subnet
of the network as the TeraStation.