Filter
Top Products
10-2
Maintenance
Cleaning the Machine
Cleaning the Machine
Note the following before cleaning your machine:
Make sure no documents are stored in memory, then turn off the main power switch and
disconnect the power cord.
Use a soft cloth to avoid scratching the components.
Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to
the components or generate static charges.
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean the machine. These can
damage the machine components.
When you turn off the main power switch, the documents stored in memory will be erased. To check the jobs stored in memory,
see the following:
Checking/Changing the Status of Fax Documents in Memory on p. 5-45.
Checking and Canceling Print Jobs on p. 6-11.
–
–
–
–
–
Exterior
Clean the exterior of the machine.
1
Turn off the main power switch and
disconnect the power cord.
2
Wipe the machine’s exterior with a clean,
soft, lint-free cloth dampened with water
or diluted dishwashing detergent
solution.
3
Wait for the machine to dry, then
reconnect the power cord and turn on
the main power switch.
Interior
Clean the machine’s print area periodically to
prevent toner powder and paper dust from
accumulating inside.
1
Turn off the main power switch and
disconnect the power cord.
2
Hold the front side of the operation panel
with your hands.