Filter
Top Products
Specifying LDAP Server Settings
3-10
3
Customizing Settings
Specifying LDAP Server Settings
The Remote UI enables you to store and edit the LDAP (Lightweight Directory
Access Protocol) server settings. If the LDAP server information is stored, the
machine can access the LDAP server on the network to search and obtain
addresses when you are storing or specifying addresses.
IMPORTANT
The LDAP server function is available only if the Universal Send Kit is activated, or the
optional Super G3 FAX Board or Super G3 Multi-Line FAX Board is installed.
NOTE
The LDAP server settings available using the Remote UI are the same as those that you
can access from the control panel of the machine by pressing (Additional Functions)
➞
[System Settings]
➞
[Register LDAP Server]. For instructions on using the control
panel to specify LDAP settings, see Chapter 11, "System Manager Settings," in the
Sending and Facsimile Guide.
1
Click [Add. Func.] ➞ select [Register LDAP Server] from the
menu that appears under [Add. Func.].