Filter
Top Products
Finisher-S1/Puncher Unit-R1
3-29
3
Optional Equipment
NOTE
•
The maximum number of sheets, including cover sheets, that can be stapled together is
30 sheets of 11" x 17", LGL, or LTR paper, and 50 sheets of LTR paper.
•
If the machine stops while stapling and the message <Load staples.> appears, almost all
of the staples have been used, and the staple cartridge must be replaced. To proceed,
replace the staple cartridge. (See "Replacing the Staple Cartridge," on p. 7-29.)
■ Hole Punch Mode
The Hole Punch mode punches two or three holes (depending on the paper size) in the
printed sheets.
NOTE
•
The hole punched areas are shown in the illustration below.
•
The distance between the punch holes is shown in the illustration below.
Platen Glass
Hole
Punched
Area
Hole
Punched
Area
Hole
Punched
Area
Hole
Punched
Area
Feeder
4 1/4"
(108 mm)
4 1/4"
(108 mm)
2 3/4"
(70 mm)
Three Holes Two Holes