Canon 3035 All in One Printer User Manual


 
Finisher-AE1/Saddle Finisher-AE2/Puncher Unit-M1
3-36
3
Optional Equipment
Saddle Stitch Mode
The Saddle Stitch mode enables you to make booklets, consisting of pages folded and
stapled in the center.
IMPORTANT
The Saddle Stitch mode is available only if the Saddle Finisher-AE2 is attached.
The maximum number of sheets, including cover sheets, that can be saddle stitched is
as follows:
To change the amount of pages that can be saddle stitched, contact your local authorized
Canon dealer.
The paper sizes that can be saddle stitched are: 11" x 17", LGL, or LTRR.
The accuracy of folds created in the Saddle Stitch mode may vary depending on the
paper type and the number of sheets.
Make sure to adjust the Booklet Tray guide to match the size of the output paper before
outputting saddle stitched prints, as shown below.
A paper jam may occur if the Booklet Tray guide is not adjusted to match the size of the
output paper.
- 15 sheets: Main Document:
17 to 20 lb bond (64 to 80 g/m
2
)
Cover Page:
17 to 32 lb bond (64 to 128 g/m
2
)
6
5
4
3
4
3
2
1
3
8
7
6
5
8
7
2
1
6
8
1
Originals
Copy
The pages are folded
and stapled in the center to
form a booklet.
11" x 17"/LGL LTRR