Filter
Top Products
Parts and Their Functions
1-12
1
Before You Start Using This Machine
a Feeder (DADF-N1) (Optional)
Originals placed in the feeder are automatically
fed sheet by sheet to the platen glass for
scanning. The feeder also automatically turns
over two-sided originals to make two or one
sided copies. The feeder is standard-equipped
for the imageRUNNER 3045/3035.
b Control Panel
Includes the keys, touch panel display, and
indicators required for operating the machine.
(See "Control Panel Parts and Functions," on p.
1-14.)
c Main Unit's Right Cover
Open this cover when clearing a paper jam
inside the main unit. (See "Screens Indicating
the Locations of Paper Jams," on p. 8-4.)
d Stack Bypass
Use the stack bypass to feed paper manually,
and for loading nonstandard paper stock, such
as envelopes. (See "Making Prints Using the
Stack Bypass," on p. 2-39.)
e Main Power Switch
Press to the "I" side to turn the power ON. (See
"Main Power and Control Panel Power," on p.
1-15.)
f Test Button
Press this button to periodically test the circuit
breaker. (See "Periodic Inspection of the
Breaker," on p. xxxiii.)
g Breaker
Detects excess current or leakage current. (See
"Periodic Inspection of the Breaker," on p. xxxiii.)
h Paper Drawer's Right Cover
Open this cover when clearing a paper jam in
Paper Drawers 1 and 2.
i Paper Drawer 2
Holds up to 550 sheets of paper (20 lb bond
(80 g/m
2
)).
j Paper Drawer 1
Holds up to 550 sheets of paper (20 lb bond
(80 g/m
2
)).
k Output Tray
Prints and copies are output to this tray.
l Output Paper Tray Guide
Tilt the output paper tray guide up to prevent
output papers from falling down.
NOTE
For more information on the optional equipment that can be attached to the machine, see
Chapter 3, "Optional Equipment."