Filter
Top Products
Finisher-S1/Puncher Unit-R1 (Optional)
7-30
7
Routine Maintenance
2
Lift the handle of the finisher unit up, and then pull it out to the
left.
CAUTION
Do not place any objects on the finisher unit, or lean on it, as doing so may
damage the machine, or cause the machine to fall over, resulting in
personal injury.
3
Lift and pull out the staple case from the stapler unit, holding
it by the green tab.
4
Place the staple case, as shown below, press the area
indicated by PUSH, and then pull out the staple cartridge.
PUSH
PUSH