Filter
Top Products
Clearing Staple Jams
8-81
8
Troubleshooting
NOTE
If there are no staples ready for stapling after the cover is closed, the stapler unit
automatically performs a "dry" stapling operation to reposition the staples.
Saddle Stitcher Unit (Optional)
If a staple jam occurs inside the saddle stitcher unit of the optional Saddle
Finisher-AE2, a screen similar to the one shown below appears on the touch panel
display. Check the location of the staple jam, and follow the procedure described
below, and the procedure that appears on the touch panel display, to remove any
jammed staples.
IMPORTANT
•
If necessary, make sure to remove all of the paper in the Booklet tray before clearing a
staple jam inside the saddle stitcher unit.
•
This procedure is necessary only if the optional Saddle Finisher-AE2 is attached.
1
Open the front cover of the finisher.