Filter
Top Products
Main Power and Control Panel Power
1-17
1
Before You Start Using This Machine
NOTE
•
Once the message <Reservation copies can be made.> appears on the touch
panel display, you can specify settings, and copying or printing begins
automatically as soon as the machine finishes warming up. (See Chapter 1,
"Introduction to the Copy Functions," in the Copying and Mail Box Guide.)
•
In the case above, the standard settings are selected.
•
The standard copy settings are:
- Copy Ratio: Direct (100%)
- Paper Selection: Auto Paper Selection
- Copy Exposure: Automatic Exposure Adjustment
- Copy Quantity: 1
- Copy Function: 1 1-sided copy
•
The standard settings for each function of the machine (Copy, Mail Box, Send, and
Fax) are already set at the factory, but you can change them to suit your needs.
(See Chapter 8, "Customizing Settings," in the Copying and Mail Box Guide, and
Chapter 9, "Customizing Communications Settings," in the Sending and Facsimile
Guide.)
•
You can select which functions to display on the Basic Features screen when
turning ON the main power, according to the Additional Functions settings. (See
"Initial Function at Power ON," on p. 4-26.)
•
If you press [
➞
] on the Basic Features screen right after the machine is activated,
the screen will be blank. Wait for a moment, and then press [
➞
] again.
•
If a Macintosh, which has been shut down, is connected to the machine via a USB
cable, when you turn the machine ON, the Macintosh may also turn ON. In this
case, disconnect the Macintosh from the machine. (You may also be able to solve
this problem by using a USB hub between the machine and the Macintosh).