Filter
Top Products
USB Settings
6-38
6
System Manager Settings
USB Settings
This mode enables you to specify the USB settings.
NOTE
Changes are only effective after you restart the machine (the main power switch is turned
OFF, and then back ON). For instruction on restarting (turning the main power switch
OFF and then ON) the machine, see "Main Power and Control Panel Power," on p. 1-15.
Using a USB Device
Set Use USB Device to 'On' to connect a computer to the machine via the USB
port.
1
Press (Additional Functions) ➞ [System Settings] ➞ [USB
Settings] ➞ [Use USB Device].
2
Select [On] or [Off] ➞ press [OK].
Using a USB Host
Set Use USB Host to 'On' to connect a host device with the machine via the USB
port.
NOTE
[Use USB Host] is displayed only if the optional USB Application Interface Board is
attached.
1
Press (Additional Functions) ➞ [System Settings] ➞ [USB
Settings] ➞ [Use USB Host].
2
Select [On] or [Off] ➞ press [OK].