Filter
Top Products
Main Power and Control Panel Power
1-24
1
Before You Start Using This Machine
4
When the following screen appears, wait for the machine to
complete the shutdown process.
If you need to immediately operate the machine after starting the shutdown
process, press [Restart] ➞ [Yes].
If you press [Restart] when device information is being updated, a message
asking for your confirmation to continue appears on the screen. Press [Yes].
CAUTION
You can also force the shutdown of the machine (omitting the normal job
cancellation process) by pressing [Forced Off]. If you press [Forced Off]
while data is being processed, a message asking for your confirmation to
continue appears on the screen. Press [Yes]. However, as it is possible that
this will destroy data which is being processed, it is not recommended.
Note that Canon will not be liable for any damages resulting from the loss
of data on the hard disk drive. For more information, contact your local
authorized Canon dealer.
NOTE
•
It may take some time for the machine to completely shut down depending on the
network you are using.
•
The screen below is displayed when you press [Forced Off] in the following case.
- When device information is being updated