Overview of the imageRUNNER 3045/3035/3030/3025
2-10
2
Basic Operations
Functions That Conserve Power
You can conserve power efficiently when the machine is not being used by using
the following modes.
NOTE
•
The touch panel display turns OFF when the machine enters one of the energy saving
modes.
•
The machine can continue to receive I-fax or fax documents, and process or print data
sent from computers even if it is in one of the energy saving modes described below.
■ Auto Sleep Mode
You can set the machine to enter the Sleep mode whenever you desire, by pressing the
control panel power switch, or specify to have the machine enter the Sleep mode at a
preset time. To reactivate the machine, press the control panel power switch again.
NOTE
•
The machine may not enter the Sleep mode completely depending on certain conditions.
(For more information, see "Energy Consumption in the Sleep Mode," on p. 4-36.)
•
Turn the control panel power switch OFF when not using the machine for a prolonged
period of time, for example, at night.
•
If a Macintosh, which has been shut down, is connected to the machine via a USB cable,
when you turn the machine ON, the Macintosh may also turn ON. In this case,
disconnect the Macintosh from the machine. (You may also be able to solve this problem
by using a USB hub between the machine and the Macintosh).
•
The time it takes for the machine to automatically enter the Sleep mode can be set from
10 seconds to 4 hours. The default setting is '2' minutes. (See "Auto Sleep Time," on p.
4-58.)
•
If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds
for the touch panel to be displayed after pressing the control panel power switch.
■ Daily Timer
The machine automatically enters the Sleep mode at the specified time and day of the
week set with the daily timer. To reactivate the machine, press the control panel power
switch.
NOTE
The Daily Timer settings can be set from Sunday to Saturday and 00:00 to 23:59. (See
"Daily Timer Settings," on p. 4-59.)