Filter
Top Products
List of Error Messages
8-93
8
Troubleshooting
Cause 3 The scanned document cannot be stored because there are more than 2,000
documents in the specified inbox.
Remedy If there are a large number of documents, delete the unnecessary ones from
the specified inbox.
# 852
Cause An error occurred because the main power switch was turned OFF while a job
was being processed.
Remedy Check to see if the main power switch is turned ON. Try processing the job
again, if necessary.
# 853
Cause 1 When trying to print a large number of pages, the job is not performed due to
insufficient memory resources.
Remedy Reduce the number of pages to print, or perform the print job again when no
other jobs are reserved.
Cause 2 The job could not be processed, because it was canceled from the printer driver
while the print data was being sent to the machine.
Remedy Try printing again.
Cause 3 The spool memory is full when Use Spooler in Network Settings in System
Settings (from the Additional Functions screen) is set to 'On', therefore, data
received from the host could not be spooled.
Remedy Set Use Spooler in Network Settings in System Settings (from the Additional
Functions screen) to 'Off', an d try sending the print data again. (See Chapter 3,
"Using a TCP/IP Network," in the Network Guide.)
Cause 4 The maximum number of receivable data exceeds the receive limit. (See
Chapter 6, "Receiving Documents," in the Sending and Facsimile Guide.)
Remedy Try printing the documents again after all current jobs are complete. If you still
cannot print, check the sent data
Cause 5 The number of secured documents exceeded the maximum limit that can be
reserved at a time.
Remedy Print or erase the secured documents that are stored in the machine, and try
printing again.