Filter
Top Products
Finisher-AE1/Saddle Finisher-AE2/Puncher Unit-M1 (Optional)
7-43
7
Routine Maintenance
8
Close the front cover of the finisher.
CAUTION
When closing the front cover of the finisher, be careful not to get your
fingers caught, as this may result in personal injury.
IMPORTANT
When you have replaced the staple cartridge, be sure to manually reposition the
staples in the saddle stitcher unit. (See "Saddle Stitch Staple Repositioning," on p.
4-60.)
Removing Punch Waste
When the punch waste tray of the optional Puncher Unit-M1 becomes full, a screen
similar to the one shown below appears on the touch panel display. Follow the
procedure described below to remove the punch waste.
NOTE
This procedure is necessary only if the optional Puncher Unit-M1 is attached.