Filter
Top Products
List of Error Messages
8-92
8
Troubleshooting
# 825
Cause 1 The Department ID and password set on the host machine do not match those
registered in the remote copy printers.
Remedy 1 Register your Department ID and password in the remote copy printers.
Remedy 2 Use a remote copy printer in which your Department ID and password are
registered.
Cause 2 Reserved or current print jobs cannot be performed in the remote copy printer
because the Department ID and password have been deleted, or the password
has been changed.
Remedy Contact your System Manager, or make sure that the Department ID and
password set in the host machine match the ones registered in the remote copy
printer.
# 849
Cause Device information could not be delivered because the client machine is
processing a job.
Remedy Try delivering device information again after the client machine finishes
processing the job.
# 850
Cause Device information could not be delivered because a screen relating to the
delivered device information is being displayed.
Remedy Try delivering the device information again after the screen is cleared from the
client machine.
# 851
Cause 1 There is insufficient memory remaining in the system.
Remedy Check the system's available memory, and delete any unnecessary documents
stored in inboxes.
Cause 2 The machine's memory is full.
Remedy Erase unnecessary documents and documents with errors from memory to
increase the amount of available memory. (See Chapter 6, "Receiving
Documents," in the Sending and Facsimile Guide, and Chapter 2, "Introduction
to the Mail Box Functions," in the Copying and Mail Box Guide.)