Canon 5050 All in One Printer User Manual


 
Protocol Settings
3-14
3
Using a TCP/IP Network
If you want to restrict the IPv4 addresses of computers from which
data (print/fax/I-fax job) can be sent to the machine:
<Apply Settings> of [Permit IPv4 Address] for <RX/Print Range>: [On]
Press [Register] store only one IPv4 address or a range of IPv4 addresses
that are to be permitted.
<Apply Settings> of [Reject IPv4 Address] for <RX/Print Range>: [On]
Press [Register] store only one IPv4 address or a range of IPv4 addresses
that are to be rejected.
If you do not want to restrict the IPv4 addresses of computers on
which the machine setting items can be set or browsed (using the
Remote UI or utility):
<Apply Settings> of [Permit IPv4 Address] for <Setting/Browsing Range>: [Off]
<Apply Settings> of [Reject IPv4 Address] for <Setting/Browsing Range>: [Off]:
If you want to restrict the IPv4 addresses of computers on which the
machine setting items can be set or browsed (using the Remote UI
or utility):
<Apply Settings> of [Permit IPv4 Address] for <Setting/Browsing Range>: [On]
Press [Register] store only one IPv4 address or a range of IPv4 addresses
that are to be permitted.
<Apply Settings> of [Reject IPv4 Address] for <Setting/Browsing Range>: [On]
Press [Register] store only one IPv4 address or a range of IPv4 addresses
that are to be rejected.