Filter
Top Products
List of Error Messages
2-55
2
Troubleshooting
# 402
Cause While the data, such as image data, was being transferred to the memory media, some error occurred because the unauthorized
character was included in the file name.
Remedy Rename the file.
# 403
Cause The job failed because the same file name existed. Generally, if the same file name exists, a file will be automatically renamed
by appending a number, which ranges from 1 to 999, to the end of its file name to avoid naming conflicts. However, this error
occurred because the file with the same number already added to its file name existed.
Remedy Rename the file, and then write the data again.
# 404
Cause The job failed because the write protect switch of the memory media was turned ON.
Remedy Turn OFF the write protect switch of the memory media.
# 406
Cause 1 The job failed because the memory media was removed from the USB port or the Network Place was deleted while the job was in
progress.
Remedy Confirm that the memory media is properly inserted or the Network Place is existed, and then write the data again.
Cause 2 While data, such as image data, was being transferred to the memory media, some error occurred. (The connected memory media
may be formatted with an unsupported file system.)
Remedy Check the status of the memory media and confirm that it is formatted with the file system that the machine supports (FAT32).
Then, perform the operation again.
Cause 3 The file size has reached the limit.
Remedy Reduce the resolution or delete pages, and then try processing the job again.
# 407
Cause The length of the full path to the specified file (or folder) exceeded the supported limit.
Remedy The limit of the length of the full path is 256. Shorten the file name to be written.
# 409
Cause The files or folders cannot be stored because the number of files or folders that can be stored has reached the limit.
Remedy Change the storage.