Filter
Top Products
Staple Finisher-E1/Booklet Finisher-E1/External 2/3 Hole Puncher-A1 (Optional)
1-32
1
Routine Maintenance
4
Insert the new staple cartridge.
Press the staple cartridge down until it clicks into place.
When replacing the staple cartridges, replace both the front and back staple cartridges.
Only one front and rear staple cartridge can be inserted at a time.
5
Pull the stapler unit of the saddle stitcher unit towards you, and then push it down into its original
position.
1. Pull the stapler unit of the saddle stitcher unit towards you, and
then push it down into its original position.
2. Gently push the saddle stitcher unit back into its original
position.
6
Close the front cover of the finisher.
When you have replaced the staple cartridge, be sure to manually reposition the staples in the saddle stitcher unit. (See e-Manual >
Settings/Registration.)