Filter
Top Products
Routine Cleaning
1-38
1
Routine Maintenance
2
Open the covers.
1. Pull the lever above the feeder, and open the cover of the
scanning area.
Open the cover of the scanning area carefully, as not to scratch the
platen glass.
2. Hold the blue tab above the inside cover, and open the inside
cover in the direction indicated by the arrow in the illustration
left.
3
Clean the feed scanning area (thin glass strip) with a cloth dampened in water or a mild detergent,
and then wipe the area with a soft dry cloth.
4
Close the covers and the feeder.
1. Close the inner cover.
2. Close the cover of the scanning area.
3. Close the feeder.
- When closing the feeder cover, be careful not to get your fingers
caught, as this may result in personal injury.
- Be aware that the light emitted from the platen glass may be very
bright when closing the feeder.
- Do not dampen the cloth too much, as this may damage the
original or break the machine.