Filter
Top Products
List of Error Messages
2-52
2
Troubleshooting
Remove the original from the platen glass.
Cause An original remains on the platen glass.
Remedy Remove the original from the platen glass, and place the new original.
Remove the original from the feeder.
Cause The machine cannot scan your original using the feeder. An original is placed in the feeder and on the platen glass.
Remedy Remove the original from the feeder.
Original scanning area (thin glass strip) is dirty.
Cause The feeder's scanning area is dirty.
Remedy Clean the feeder's scanning area.
(See “Cleaning the Original Scanning Area of the Feeder (Duplex Color Image Reader Unit),” on p.
1-37.)
Original scanning area (Feeder) is dirty.
Cause The feeder’s scanning area is dirty.
Remedy Clean the feeder’s scanning area.
(See “Cleaning the Original Scanning Area of the Feeder (Duplex Color Image Reader Unit),” on p.
1-37.)
Adjusting gradation. Please wait a moment.
Cause The machine is performing an automatic gradation adjustment.
Remedy Wait for the machine to finish the automatic gradation adjustment. When the adjustment is complete, printing automatically
resumes.
Cleaning the drum... Please wait a moment...
Cause The machine is in the process of cleaning the drum.
Remedy Wait for the machine to finish cleaning the drum. When cleaning is complete, printing automatically resumes.
Remove the paper from the folding unit stack area.
Cause Output from a previous job remains in the output area of the
Document Insertion/Folding Unit.
Remedy Remove the paper in the output area of the
Document Insertion/Folding Unit.