Filter
Top Products
Paper Deck Unit-A1/Paper Deck Unit-D1 (Optional)
1-16
1
Routine Maintenance
1
Press the open button to open the paper deck.
1. Press the open button.
2. Open the paper deck.
The inside lifter automatically descends to the paper loading position.
2
Open a package of paper, and remove the paper stack.
3
Load the paper stack into the paper deck, and close the paper deck.
1. Load the paper stack.
Make sure that the inside lifter has lowered before loading paper, and
even out the edges of the paper stack, and stack the paper neatly
against the inner paper guide.
-Do not load paper into the paper deck that has been previously
copied onto, as this may result in a malfunction or damage to the
copier. Always use the Multi-Purpose Tray to feed paper when you
want to copy onto the back of a sheet of paper that already has
something copied on its front side (2nd side of 2-Sided copy).
-Make sure that the height of the paper stack does not exceed the
loading limit mark ( ) on the inside of the paper deck.
-Load the paper stack in stages in Paper Deck Unit, adding
approximately 550 sheets of paper (20 lb bond (80 g/m
2
)) at a time. If
the paper deck can accommodate more paper, the lifter will descend.
-When paper is loaded in the paper deck, the side facing up is the one
printed on.
2. Gently push the paper deck back into the machine until it
clicks into place in the closed position.
The inside lifter automatically rises, and prepares the paper deck for
feeding.