Filter
Top Products
Routine Cleaning
1-40
1
Routine Maintenance
4
Close the covers.
1. Close the inner cover.
2. Close the feeder cover.
5
Clean the feeder scanning area (thin glass strip) and the resin roller.
1. Open the feeder.
2. Clean the feeder scanning area with a cloth dampened with
water. Then, wipe the area with a soft dry cloth.
3. Clean the left side of the rubber roller with a cloth dampened
with water. Then, wipe the area with a soft dry cloth.
4. Close the feeder.
Be aware that the light emitted from the platen glass may be very
bright when closing the feeder.