Filter
Top Products
9-2
Clearing jams
Jams in the Automatic Document Feeder (ADF)
When a document jams or misfeeds in the ADF, CHECK DOCUMENT is displayed on the LCD.
Follow the procedure below to clear the document jam.
You do not need to unplug the fax when clearing document jams.
1
Press [Stop].
2
Open the operation panel partially by
gently pulling it towards you.
• It only opens slightly.
• Do not try to pull the document out without opening the
operation panel since you may tear or smudge the
document.
3
While holding the operation panel open,
remove the document.
4
When you are finished, close the
operation panel by pressing it down from
the centre.
• Pull it gently in either direction.
• If a multipage document is loaded, remove the entire
document from the ADF.
Be sure to close the operation panel until it locks into
place, or the fax will not function properly.
If the paper does not pull out easily, do not force
it. Contact your local authorised Canon dealer or
the Canon Help Desk.
Stop